SHP-PRO
Looking for the Workhorse
That Can Do It All?

UL864: 9th Edition Compliant


The SHP-PRO™ Fire Detection and Fire Protection System
Fike SHP-PRO™ is THE reliable, conventional fire suppression system. This microprocessor-based fire detection system can be easily configured for use within a wide range of industries and fire suppression applications:
  • Clean Agent fire suppression for high value asset protection
  • Fire Sprinkler and Sprinkler Pre-action deluge for protection of building structure
  • Control of BOTH fire sprinkler pre-action / deluge and clean agent fire suppression systems . . . for COMPLETE FIRE PROTECTION using ONE Fire Suppression Panel!
  • Industrial applications including Clean Agent fire suppression systems, Foam suppression systems, and Fike's premier water mist system, Micromist.
In addition to several new application possibilities, the SHP-PRO™ fire detection system features several key improvements to the original SHP, including the addition of release disabled & ground fault LED's, one additional input circuit, an optional Class A output module and MORE POWER! The SHP-PRO™ fire suppression system is also built for easy installation, making it versatile and easy to manage. This reliable fire detection workhorse is compliant with the UL 864 Standard, rounding out a list of features which make the SHP-PRO™ the leader in conventional fire detection and fire protection.

Look for all the following features and more in your new SHP-PRO™ fire detection / fire suppression system:
  • Configurable via dip-switches
  • Disable Mode for audible circuits, release circuits, and relays
  • Alarm and trouble resound
  • Selectable 120 or 240VAC power input
  • Optional batteries for up to 90 hours of standby power
  • Removable door for easy installation
  • Up to two Style B initiating device circuits capable of sequential alarm, cross-zone, or single detector release operation with an overall system capacity of 50 detectors.(25 when both releasing circuits are used)
  • Three Style B initiating device circuits capable of monitoring closed contact devices
  • Optional Class A module that converts all five initiating device circuits to Style D wiring operation
  • Three Style Y notification appliance circuits rated at 2.0 amps each
  • One Agent Release circuit with maximum of 6 ARM III's and/or depending upon model of SHP-PRO™ ordered one solenoid release circuit which can activate one 24V or two 12V solenoids
Additional information about the SHP-PRO™ System:
SHP-PRO™ Brochure
SHP-PRO™ Data Sheet

Additional information on fire alarm, fire detection sensors, smoke detectors and other fire detection and fire suppression peripheral items for the SHP-PRO™.

Ionization Detectors Photoelectric Detectors
Rate of Rise Thermal Detector Thermal Detectors
Detector Base Analog Heat Sensor
400 Series Plug In Smoke Detector Double Combination Control Accessories
Triple Combination Control Accessories Duct Detectors
Duct Detector Remote Accessories Manual Pulls
Manual Release Switch Countdown Timer Combinations

Modules for the SHP-PRO™ Protection System:
Agent Release Module SCI - Short Circuit Isolator

Accessories for the SHP-PRO™ Fire Protection System:
Power Supplies/Boosters Expanded Enclosure
Fire Communicator Graphic Annunciators
Conventional Graphic Annunciator